in-akustik Audio Cables

Digital-2405 AIR Pure Silver

Pure silver digital cable. 25 mm Air Helix.

The Digital-2405 AIR Pure Silver replaces every copper conductor with high-purity solid silver within the 25 mm Air Helix architecture. Silver's 6% higher conductivity and 1.5x faster electron drift deliver enhanced timing precision and jitter reduction in digital audio transmission. Identical construction to the copper version — same Air Helix clips, Cross Link Super Speed waveguides, and dense tin-plated copper braid shielding. Available in RCA (S/PDIF, 75 ohm) and XLR (AES/EBU, 110 ohm) configurations. Hand-assembled in Germany.

At a Glance

●Pure silver conductors

●25 mm cable diameter

●Point-to-Point Air Helix

●75 ohm (RCA) / 110 ohm (XLR)

●Available in RCA & XLR

●Handmade in Germany

Key Features

Pure Silver Conductors

High-purity solid silver at 61.35 S/m conductivity — 6% superior to copper with 1.5x faster electron drift for enhanced digital timing precision.

25 mm Air Helix Architecture

Identical Air Helix construction to the copper version — silver conductors suspended in air for zero dielectric losses.

Precise Impedance Control

75 ohm (RCA/S/PDIF) or 110 ohm (XLR/AES-EBU) — precisely matched to digital audio standards for bit-perfect transmission.

360 Degree Connectors

RCA SL with rhodium-coated tellurium copper contacts pressure-grouted at 1.5 tonnes; XLR with 180-degree rotatable plugs.

Technologies Inside

AIR Technology

Air is the perfect insulator.

Now in its fifth generation, AIR technology uses air as the primary dielectric instead of traditional plastics like PVC. Conductors run freely suspended through the cable via precision-engineered clips at defined intervals, reducing capacitance by approximately 83% compared to standard cables. The Point-to-Point Air Helix architecture extends this principle from connector to connector for almost loss-free signal transmission.

Cross Link Super Speed

Eliminating eddy currents at high frequencies.

Cross Link Super Speed waveguides are hand-threaded into the cable structure to prevent eddy current effects at high frequencies. This preserves the full detail and extension of the audio signal across the entire audible spectrum, ensuring transients remain sharp and high-frequency information arrives intact.

Multicore Architecture

Overlapping fields, lower inductance.

in-akustik's multicore conductor arrangements use four-fold structures where the overlapping magnetic fields of individual conductors deliberately cancel each other out. This reduces inductance and minimises the skin effect at high frequencies, delivering a more neutral, dynamic frequency response.

360 Degree Pressure-Grouted Connectors

Three-axis rotation. 1.5 tonnes of force. Zero solder.

in-akustik's 360-degree BFA banana and spade lug connectors move across three axes, making connection and disconnection effortless while preventing cable stress. Instead of soldering, which introduces additional metal alloys and weak points, each connector is pressure-grouted at 1.5 tonnes of force — creating a gas-tight, vibration-resistant bond. BFA bananas use beryllium copper with solid metal housings, while spade lugs use tellurium copper, both rhodium-coated for lasting conductivity and corrosion resistance.

AIR Helix Point-to-Point

Fifth-generation air insulation, from plug to plug.

The AIR Helix design suspends conductors in a helical arrangement through the cable using specially engineered clips at precise intervals. Air replaces traditional plastic insulation as the primary dielectric, reducing capacitance by approximately 83%. The fifth-generation Point-to-Point innovation extends this architecture from connector to connector, with specialised transitions for each plug-cable combination eliminating the last remaining sections of conventional insulation.