Lockwood Loudspeakers

Universal Stanley 2

Scale, control and presence — in any colour.

The Universal Stanley 2 takes the custom 5-inch Lockwood Alnico point-source unit and sealed-cabinet philosophy of the Stanley 1 and gives them a larger canvas. The floor-standing form moves more air, energises larger rooms and presents music with an unforced authority, while keeping the coherence and tonal truth of the compact model. Every cabinet is handcrafted in the UK from birch ply, in walnut veneer or any Pantone colour you choose.

At a Glance

●5 inch (127 mm) Alnico point-source unit

●2-way sealed floor-standing design

●45–20,000 Hz

●88 dB sensitivity (2.83 Vrms, 1 m)

●8 Ω impedance

●Infinite baffle 18 mm birch ply cabinet

●Lockwood A Series crossover

●260 × 165 × 995 mm (W × D × H)

●Walnut veneer or any Pantone colour

●Handcrafted in the UK

Key Features

Extended Performance

Deeper bass, greater scale and higher sound pressure capability than the Stanley 1, without giving up the coherence and musical truth that define the Universal series.

Effortless Authority

The floor-standing form moves more air and energises larger rooms, presenting music with an unforced, entirely natural authority that belies its slim proportions.

Handcrafted and Personalised

Every surface, edge and proportion is considered — handcrafted in the UK from birch ply, and available in any Pantone colour.

Technologies Inside

Point-Source Drive Units

One driver. One point in space.

Every Lockwood is built around a single Lockwood Green HPD/SL drive unit in which the high and low frequencies radiate from the same point. Nothing is split across two boxes of air, so the music arrives at the listening seat as one coherent event — with the time coherence, low colouration and natural vocal reproduction that made these cabinets the studio reference.

The point-source principle is what a monitor needs and what most domestic speakers give up. Because the tweeter sits at the acoustic centre of the bass cone, the two arrive together at every seat in the room rather than only on one narrow axis — which is why engineers could trust a pair of Lockwoods to tell them the truth about a mix. The driver is made in four sizes across the range: 15 inch (385 mm) in the Major, LE1 and Academy II, 12 inch (315 mm) in the Academy 1, 10 inch (295 mm) in the Mini, and a 5 inch (127 mm) Alnico unit in the Mini Major and the Universal Stanley models.

A Series Crossover

Hand-built, and kept out of the way.

Every model in the range uses the Lockwood A Series crossover — hand-built from premium components and wired internally with OFC cable. The design goal is a signal path short and clean enough that the drive unit is the only thing shaping the sound.

Birch Ply Cabinets

18 mm birch ply, built in the UK.

Cabinets are made from 18 mm birchwood ply using construction techniques refined over nearly a century — vented on the Major and LE1, infinite baffle elsewhere — then finished in walnut veneer, or in any Pantone colour on the Universal Stanley models. The enclosure is treated as part of the acoustic design rather than a box to put a driver in.

Gallery

A closer look at the Universal Stanley 2.

Experience the Universal Stanley 2

Visit our showroom for a personal demonstration. Hear the difference for yourself.

Book a Demo Visit Lockwood

For complete specifications and technical details, visit the official Lockwood website.